BMTFR - SACI 2452

  • MSDS: BMTFR
  • Manufacturer: WITCO
  • Product Name: SACI 2452
  • National Stock Number: 6810-00N027112
Product Identification

Product ID:SACI 2452
MSDS Date:07/02/1990
FSC:6810
NIIN:00N027112
MSDS Number: BMTFR

Responsible Party
WITCO
3300 WEST FOURTH ST
CHESTER, PA 19013
US

Emergency Phone: 215-494-3561;800-424-9300(CHEMTREC)

Info Phone: 212-605-3911

Preparer: ALEXANDER COUTRAS

Cage: 6Z384

Contractor
WITCO CHEMICAL CORP SONNEBORN CHEMICAL & REFINING
NEW YORK, NY 10017-6156 US

Telephone: 800-424-9300(CHEMTREC)

Cage: 78369

Ingredients

HYDROTREATED LIGHT PETROLEUM DISTILLATE.

CAS: 64742-47-8

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE, NOSE AND THROAT
IRRITATION AND DIZZINESS IF USED IN UNVENTILATED AREA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH IMMED W/LARGE AMOUNTS OF COOL WATER FOR AT LEAST
15 MINS. CALL MD. SKIN: WASH CONTAMINATED AREA WITH SOAP AND WATER.
INHAL: REMOVE VICTIM TO FRESH AIR. CALL MD. INGEST: CALL MD
IMMEDIATELY .

Fire Fighting

Flash Point Method:PMCC
Flash Point:105F,41C
Lower Limits:0.8%
Extinguishing Media:DRY CHEMICAL, CO2, WATERSPRAY, FOAM, WATERFOG,
SAND/ EARTH.
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . WATER SPRAY MUST BE USED WITH CAUTION TO PREVENT THE
SPREAD OF FLAMES.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:SHUT OFF LEAK & DIKE UP LGE SPILLS. AVOID ALL
IGNIT SOURCES SUCH AS FLAMES/SPARKS. INSURE GOOD VENT. IF VOL IS
SIGNIFICANT, TRANS INTO CNTNRS FOR DISP. SEAL CNTNRS TIGHTLY.
ABSORB ON INERT MATL SUCH A S EARTH, SAND/VERMICULITE. SWEEP UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PROTECT AGAINST EYE CONTACT; AVOID
HEAT, FLAME AND OXIDIZING AGENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR AS REQUIRED
TO PREVENT OVER-EXPOSURE. IN ACCORD W/29 CFR 1910.134, USE EITHER A
FULL-FACE ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AIR-PURIFYING
RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:USE VENTILATION AS REQUIRED TO CONTROL VAPOR
CONCENTRATIONS.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:FACE SHIELD.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<2
Vapor Density:>1
Spec Gravity:0.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN THIXOTROPIC LIQUID W/SLIGHT, KEROSENE-LIKE
ODOR.
Percent Volatiles by Volume:48(WT)

Stability

Stability Indicator/Materials to Avoid:YES
KEEP AWAY FROM SPARKS, OPEN FLAMES AND STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:UPON COMBUSTION, COX AND SOX ARE
GENERATED.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.